- Registrato da: 11 Novembre 2026
Descrizione:
Bosch 800 Series Dishwasher E24 Error: Why Water Remains Inside the Machine
The dishwasher has finished its washing stage, but instead of draining, it stops and displays E24. Opening the door reveals dirty water at the bottom of the tub. Running another programme produces the same result.
On Bosch 800 Series dishwashers, E24 indicates a drainage problem. It does not automatically mean that the drain pump needs replacement. Food debris, a blocked filter, a restricted drain hose or a problem with the household plumbing can all interfere with water removal.
The most useful approach is to treat the error as a drainage investigation rather than immediately dismantling the appliance.
The filter is not the only suspect
The first inspection should be performed at the bottom of the dishwasher. Remove the lower rack and take out the filter assembly according to the manufacturer's instructions. Wash the filters under running water using a soft brush and mild detergent.
Look for more than ordinary food residue. Small pieces of glass, fruit stones, labels and fragments of packaging can accumulate around the drainage area.
If the filter is heavily contaminated, cleaning it may restore normal drainage. However, a clean filter does not prove that the pump is unobstructed.
Bosch manuals explain how to access the filter and drain-pump area safely. Before touching anything beneath the filter, disconnect the dishwasher from electrical power.
The hidden obstruction beneath the filter
A particularly unpleasant discovery is a small fragment of broken glass lodged near the drain-pump impeller. It may prevent the pump from moving water even though the motor still makes a humming sound.
If the model's instructions permit user access to the pump cover, follow that procedure carefully. Wear protective gloves because sharp fragments may be hidden in standing water. Remove only accessible debris, check that the pump cover is correctly secured and reinstall the filter.
Never force the impeller or insert tools into an inaccessible mechanism. If the pump remains blocked or appears damaged, professional servicing is appropriate.
When the problem is outside the dishwasher
There is another possible explanation that has nothing to do with the appliance's internal components.
Imagine that the kitchen disposer was replaced shortly before the E24 error appeared. During installation, the dishwasher inlet connection on the disposer may have been left sealed by its factory knockout plug.
In this situation, the dishwasher can operate normally but cannot discharge wastewater through the connection.
A restricted sink siphon or sharply bent drain hose can create similar symptoms. Inspect visible hose sections and the accessible plumbing connection. If the installation requires disconnection or modification, make sure the appliance is isolated from electricity and arrange appropriate plumbing assistance.
Bosch also identifies a loose drain-pump cover, blocked hose and obstructed siphon connection as possible contributors to E24.
Бош+1
What the next cycle should tell you
Once an accessible obstruction has been removed and all covers and filters are correctly installed, run a short rinse or drain programme while observing the appliance.
Pay attention to three things:
- Does the water leave the tub completely?
- Is there any leakage underneath the dishwasher?
- Does E24 return during the cycle?
If the error disappears and drainage is normal, the obstruction may have been the cause. If it returns, avoid repeatedly restarting the machine. The drain pump, wiring or control system may need professional testing.
The Bosch manuals for the SHPM78Z55N help identify the correct maintenance procedures and component locations. Always verify the complete E-Nr model designation on the appliance rating plate before ordering parts or following repair instructions.
An E24 message is best treated as evidence of interrupted drainage, not proof of a failed pump. Sometimes the actual culprit is a tiny piece of debris, a loose cover or a plumbing connection that was never opened during installation.